Comparison of different feeding techniques for a patch antenna at an X frequency band to evaluate its quantitative impact on the antenna’s parameters

Main Article Content

Rabia Shafique
Kelash Kanwar
Fida Hussain
Ruben Morales Menendez
Mohammad Khubeb Siddiqui
Haris Jawad Arain
Monica Mehrotra

Abstract

In this paper, the comparison of different feeding techniques for a patch antenna, at X frequency band, to evaluate its quantitative impact on the different antenna parameters is presented. When different feeding techniques are applied at the X band spectrum to improve the impedance matching the performance of various characteristics parameters such as radiation pattern, gain, beam width etc are influenced. To find how much these are influenced a comparative analysis is carried out and results are presented in this paper. For investigation purpose, the patch antenna and the various feeding techniques were designed on Roger (RT5880) substrate at 8 GHz resonating frequency.

 

PLUM ANALYTICS

Article Details

How to Cite
Shafique, R., Kanwar, K., Hussain, F., Menendez, R., Siddiqui, M., Arain, H., & Mehrotra, M. (2020). Comparison of different feeding techniques for a patch antenna at an X frequency band to evaluate its quantitative impact on the antenna’s parameters. Journal of Applied Research and Technology, 18(6), 341-361. https://doi.org/10.22201/icat.24486736e.2020.18.6.1350
Author Biographies

Rabia Shafique

Department of Electronic Engineering, QUEST, Pakistan

Kelash Kanwar

Department of Electronic Engineering, QUEST, Pakistan

Fida Hussain

School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China

Ruben Morales Menendez

School of Engineering and Science, Tecnologico de Monterrey, Monterrey, Mexico

Mohammad Khubeb Siddiqui

School of Engineering and Science, Tecnologico de Monterrey, Monterrey, Mexico

Haris Jawad Arain

Department of Energy and Environmental Engineering, QUEST, Pakistan

Monica Mehrotra

Department of Electrical Engineering, BBDEC, Lucknow, India