Nanocolumnar CdS thin films grown by glancing angle deposition from a sublimate vapor effusion source

Main Article Content

Luis Germán Daza
Román Castro Rodríguez
Marco Cirerol Carrillo
Enrique Adrián Martín-Tovar
José Méndez Gamboa
Rubén Medina Esquivel
Ignacio Pérez Quintana
Augusto Iribarren

Abstract

The glancing angle deposition (GLAD) technique was used to grow cadmium sulfide (CdS) thin films on glass and indium tin oxide (ITO)-coated glass substrates from a sublimate vapor effusion source. The samples were prepared under different incident deposition flux angles (?) of 0° , 20° and 80° , while both the substrate and the source were under rotation. The temperature of the source was 923.15 K. Scanning electron microscopy images showed that the GLAD method combined with the source produced dense nanocolumnar structures with height and diameters of ?200 and ?30 nm, respectively. The deposited films displayed a hexagonal structure with preferential (002) plane orientation and crystallites sizes between ?25 nm and ?35 nm. A maximum solar weighted transmission of ?92% was obtained for the sample prepared at ? = 80° , with a substrate/source rotation velocity ratio of 55/20 in the wavelength region of 400–900 nm. The average band-gap energy of the films was ?2.42 eV. Refractive
indexes between ?1.4 and ?2.4 at a 550 nm the wavelength was also obtained.

Article Details

How to Cite
Daza, L. G., Rodríguez, R. C., Carrillo, M. C., Martín-Tovar, E. A., Gamboa, J. M., Esquivel, R. M., Quintana, I. P., & Iribarren, A. (2019). Nanocolumnar CdS thin films grown by glancing angle deposition from a sublimate vapor effusion source. Journal of Applied Research and Technology, 15(3). https://doi.org/10.1016/j.jart.2017.02.003
Section
Articles
Author Biographies

Luis Germán Daza

Department of Applied Physics, CINVESTAV-IPN, Unidad Mérida, 97310 Mérida, Yucatán, Mexico

Román Castro Rodríguez

Department of Applied Physics, CINVESTAV-IPN, Unidad Mérida, 97310 Mérida, Yucatán, Mexico

Marco Cirerol Carrillo

Yucatan Autonomous University, Faculty of Engineering, AP 150 Cordemex, 97310 Mérida, Yucatán, Mexico

Enrique Adrián Martín-Tovar

Department of Applied Physics, CINVESTAV-IPN, Unidad Mérida, 97310 Mérida, Yucatán, Mexico

José Méndez Gamboa

Yucatan Autonomous University, Faculty of Engineering, AP 150 Cordemex, 97310 Mérida, Yucatán, Mexico

Rubén Medina Esquivel

Yucatan Autonomous University, Faculty of Engineering, AP 150 Cordemex, 97310 Mérida, Yucatán, Mexico

Ignacio Pérez Quintana

Yucatan Autonomous University, Faculty of Engineering, AP 150 Cordemex, 97310 Mérida, Yucatán, Mexico

Augusto Iribarren

Department of Applied Physics, CINVESTAV-IPN, Unidad Mérida, 97310 Mérida, Yucatán, Mexico

Instituto de Ciencia y Tecnología de Materiales, Universidad de La Habana, Zapata y G, Vedado, La Habana 10400, Cuba